Toggle DHCP on UX310 Device

The following article describes the process of toggling whether the Moneris device is using DHCP or not.

Make sure a pin pad is plugged in to the device

SMRT1 will provide the relevant passwords

Access the UX301 device's supervisor screen by pressing the little button on the back. 

Select supervisor and enter the password (******* but can also be *****, ******* or *******). via the pin pad.

Now in supervisor: 

Administration -> Network -> Ethernet (Hit 2 4 2 on the pin pad for short).

Now in Ethernet, select DHCP

Once selected, return to Supervisor via CORRECT or CANCEL key, press 7, or scroll down to RUN APP and select. 

The device should now be starting up